Samsung DVD Player HD-941 Powers up but no video signal output
It powers up but no video signal to same or other TV sets. I tried several different TV sets but all show no video signal.
Это хороший вопрос?
Оценка
0
241831
1 ответ
Репутация: 4,6к
27
17
5
Try a different video cable to see if that works.
Был ли этот ответ полезен?
Оценка
0
Thanks. Never am I that lucky. I took the board out for inspection and found that Samsung to reap higher profits used a contact female connector held in place with 4 small drops of epoxy to the board. It holds until pressure on the cable and eventually separates and causing the board to be unrepairable. This is what happened and unless you are a Samsung technician your choices are shipment 2 ways , their tech fee, part fee if they have it and by then it is cheaper to buy another which I did but never another Samsung product. Again thanks.
