Перейти к основному содержанию

1.6 or 1.8 GHz dual-core processor, 2 GB or 4 GB of SDRAM, 64 GB or 128 GB SSD

192вопросов Показать все

Installed new battery, but not charging

I recently installed a new (aftermarket) battery in my MacBook Air 11" after the original battery stopped working.

After replacing the battery status reads Replace Now. Not charging.

After some research I decided to replace the i/o board but unfortunately I get the same result.

Suggestions? Should I assume the new battery is faulty? Or should I try replacing the i/o board cable as well?

Update (09/30/2015)

In addition: I have tried two different MagSafe chargers and also reset the SMC twice.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 1
Добавить комментарий

1 ответ

Try a PRAM reset holding alt, cmd and R+P on start up until your hear the chime again. This should enable the macbook to attempt to charge, failing that clean the charger ports well with alcohol using a paintbrush/toothbrush - then try again. This has worked for me in the past. Alternatively you may have a faulty battery - aftermarket ones can occassionally arrive without charge.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

MichaelV74 будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 4

За всё время: 315