How to recognise 3GS from 3G display?

Question

iPhone 3G

Второе поколение iPhone. Модель A1241; 8 или 16 ГБ памяти; с черной или белой задней пластиковой крышкой. Ремонт проще, чем первого iPhone. Требует отвертки и инструментов для вскрытия.

1158вопросов Показать все

karel b @karelb

Репутация: 1

2

Опубликовано: 9 авг 2010 г.

Опции

How to recognise 3GS from 3G display?

I bought a replacement LCD for my 3G, but instead of seeing anything, I see just horizontal and vertical lines (while the phone 100% runs, I hear ringing, I can connect to iTunes...).

Plus, while the connector is very similar, it doesn't hold very much on the logic board and if I move a little with the display, the cable is out.

My first LCD still works on the same phone, but with no backlight. (which was the reason why I wanted to replace it)

My suspicion is they sent me 3GS instead of 3G LCD. Is there any way to tell them apart?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка -1

Добавить комментарий

1 ответ

score 1 · Answer 1 · 2010-08-09T16:11:59-07:00

Наиболее полезный ответ

Scott Head @scotth

Репутация: 52,8к

Scott's Repair Company

49

28

225

Опубликовано: 9 авг 2010 г.

Опции

The ZIF connector of the 3G and 3GS displays are different. The connector for the 3G has a small plastic rectangular piece in the center of it while the 3GS does not.

If you look at this photo of a 3G display, the connector has no piece of plastic in the center of it.

This picture of a 3GS display shows the rectangular piece of plastic in the center of the ZIF connector.

Был ли этот ответ полезен?

Да Нет

Оценка 1

6 Комментариев:

hm... so it seems I really have 3G....

I made a picture to be sure - http://imgur.com/t7WG4.jpg - your answer would imply it's 3G.

9 авг 2010 г. из karel b

That is a 3G connector

9 авг 2010 г. из Scott Head

Oh, OK. So, either the display itself is faulty, or I destroyed it somehow while maneuvering with it. How easy is to break LCD while sticking it to the construction and then putting it to iPhone? I think I was extra careful (I know, it's probably for another question)

9 авг 2010 г. из karel b

Look for a bent, gold lead on the logic board. Bent leads can cause problems with displays. The connector on the panel itself looks like it is intact judging from the picture you posted. If everything looks ok, then contact iFixit customer support (support@ifixit.com) and we can set up a return for you and get a new panel out to you. Reference this Answer in your email.

9 авг 2010 г. из Scott Head

The LCD was not bought on iFixit, you don't send to my country (Czech Republic) :-( or, at least, didn't when I last checked.

9 авг 2010 г. из karel b

Показать 1 больше комментариев

Добавить комментарий

iPhone 3G

How to recognise 3GS from 3G display?

1 ответ

Добавьте свой ответ