Cannot use my home button and touch id

Question

iPhone 5s

Компания Apple представила iPhone 5s 10 сентября 2013 года. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 32 или 64 ГБ памяти; в цветах: Серебристый, Золотой и «Серый космос».

Вопросов 20 Показать все | Запчасти для 45 В магазин

Вопрос закрыт

CharlesLilyy @charles96

Репутация: 11

1

Опубликовано: 2 мар 2016 г.

Опции

Cannot use my home button and touch id

Hello everybody,

I have a problem.

I replaced a iPhone 5s screen and everything goes well like always but after a week I cannot use my home button and touch ID

If I go to the settings and try to make the touch id enable it came out that unable to complete Touch Id setup, Please go back and try again.

What can i do ? Do I have to replace the home button ? If Yes How much does it cost ?

Thank you for helping me !

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

1 Комментарий

Its frustrated right. I went to the phone centre. They recommended that I just change the home button. But still I cannot use the touch id after replace it.

5 мар 2016 г. из CharlesLilyy

Добавить комментарий

Ответов (2)

Выбранное решение

Patrick @c3pt

Репутация: 283

3

Опубликовано: 3 мар 2016 г.

Опции

You need to be using the original home button from the phone in order for it to work. The fingerprint sensor is uniquely tied to each 5s. Open it up and see if the clip came loose. Try cleaning it out too, there might be some dust/dirt in the way.

Был ли этот ответ полезен?

Да Нет

Оценка 0

2 Комментариев:

I tried but still cannot use the home button. Is that true if I change a new home button the touch id cant be use ?

5 мар 2016 г. из CharlesLilyy

Is there any solution that I can do ? thanks for the info anyway :)

5 мар 2016 г. из CharlesLilyy

Добавить комментарий

Its frustrated right. I went to the phone centre. They recommended that I just change the home button. But still I cannot use the touch id after replace it. — CharlesLilyy
I tried but still cannot use the home button. Is that true if I change a new home button the touch id cant be use ? — CharlesLilyy
Is there any solution that I can do ? thanks for the info anyway :) — CharlesLilyy

Rany @rany Репутация: 41,1к iCenter SARL 15 78 90 · Answer 1 · 2016-03-05T08:48:16-07:00

Наиболее полезный ответ

Rany @rany

Репутация: 41,1к

iCenter SARL

15

78

90

Опубликовано: 5 мар 2016 г.

Опции

Did you check that the home button flat cable is not loose?

If it is properly seated yet not working, you may want to determine the cause such as damaged/crinkled/torn or some other issue somewhere else. Or you may just want to replace it with a new known good home button flex cable. If the latter works as a home button, you'll loose Touch ID functionality.

Был ли этот ответ полезен?

Да Нет

Оценка 2

2 Комментариев:

How would repair it to retain Touch ID functionality? Link please on this issue.

5 мар 2016 г. из mayer

@mayer, can replace flex cable to regain home button function, but cannot retain Touch ID except if replacement is done @ an Apple Store. In some cases we can repair corroded connector or partially torn flex cable. Completely torn is so difficult to repair that it's not economically feasible.

6 мар 2016 г. из Rany

Добавить комментарий