Samsung Laser printer stopped working and will not boot or initialize.

Question

Samsung ML-D1630A

Whitecat @whitecat

Репутация: 1

1

Опубликовано: 13 сен 2016 г.

Опции

Samsung Laser printer stopped working and will not boot or initialize.

The printer worked perfectly. Then the printer stopped working one day. I have changed the power cord and changed toner and changed wall outlet location. I can hear the fan running but the printer/copier does not respond. There is one blue light illuminated on the control panel but I am unable to print or copy or scan. The printer does not seem to initialize or boot up. This printer was always plugged into a surge suppressor. Thank you for any help or suggestion.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

1 ответ

Printer Tales @printertales1 Репутация: 1 · Answer 1 · 2024-04-24T00:01:12-07:00

I was once facing the similar situation on my Samsung printer and was unable to perform any task. It first tried restarting the device, but it was no help. After that, I tried to update the printer driver and inspect the printer for any problems. Also, I clean the parts inside the printer to ensure there is no debris.

After that, I performed the printer connection process once again. With these solutions, my printer was working again without any issues. So, you can also try these fixes along with others to see if your printer shows any improvements. If not, then it will be beneficial to seek professional help to get your printer working smoothly once again.

Samsung ML-D1630A

Samsung Laser printer stopped working and will not boot or initialize.

1 ответ

Добавьте свой ответ