Перейти к основному содержанию

A 12.2-inch "prosumer" tablet released in February 2014. Powered by a custom version of Android 4.4 KitKat.

40вопросов Показать все

My tablet will not turn on after some DIY repairs

My tablet had screen flickering issues and after some research, I decided to unplug the battery and reconnect. Little did I know that the battery connector on the motherboard breaks off super easy. So then my only option was to re-solder the pins to the connectors, which I did but it still won't turn on. Some of the connectors won't accept the solder so I super-glued them, but still nothing. Any advice would be great, I called UbreakIfix and they said the base cost of repair would be over $300, which I cannot afford. Should I call Samsung? Thank you for any help.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Выбранное решение

luke.puller , Very big mistake using the super glue for trying to make a electrical connection as it could do the opposite and become an isolator. Probably best to just take it into a good local computer/cell phone repair shop and have them take a look and estimate repair. The whole board can be purchased for $120.00 and can probably be found used for a lot less if need be. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

http://www.ebay.com/itm/OEM-Samsung-Gala...

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

Добавьте свой ответ

luke.puller будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 101