Перейти к основному содержанию

Четвертое поколение iPhone. Ремонт прост, но дисплей должен быть заменен в сборе с сенсорным стеклом. Версия GSM; 8, 16 или 32 ГБ памяти; модель A1332; в Черном или Белом цвете.

3272 Questions Показать все

My Digitizer Cable is cut in the middle, can I fix it?

Ok so I ordered a white iphone lcd+digitizer, and i put everything in, but the little cut off on the digitizer cable didnt go through the hole fully. I put everything together, and the cable wouldnt reach, I kinda tugged and took it apart, but it kinda ripped or tore, but it is still connected by a small piece. Is there any way I can put it together? Because the lcd works, but the digitizer isnt working. Can I fix it, or put it together?

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

по рейтингу 0
Добавить комментарий

iPhone Battery Fix Kits

Only $29.99

Buy Now

iPhone Battery Fix Kits

Only $29.99

Buy Now

2 Ответов

Выбранное решение

Nope, quite unfortunately Apple decided it didn't matter how much money and parts people are gonna waste, the whole digitizer+lcd+glass are one single unit.

Был ли этот ответ полезен?

по рейтингу 2

Комментарии:

absolutely agreed.

от

I did the same so I guess I have to order a new one then.

от

Yes you will. there is no way of fixing it. I know of people that have tried crazy glue etc. but those are really not good solution since they at best are just temporary fixes. Good luck

от

I know dude sucks.... Also @oldturkey03 how does the crazy glue work? Does it work even temporarily?

от

The one I have heard of was a guy who used a strong magnifier to look at both ends of the cable and he glued the frayed ends together, very tedious, but he got it accomplished. I guess what I would do is take a look with a good strong magnifier and see what the ends look like and if you can overlap that a bit to have the contacts meet, at this time you got really nothing to lose....good luck.

от

Показать 1 больше комментариев

Добавить комментарий

Could the plastic pieces be soldered together as a way to keep the pieces together and keep conductivity?

Был ли этот ответ полезен?

по рейтингу 0

Комментарии:

How can you solder plastic?

от

Добавить комментарий

Добавьте свой ответ

TechTrace будет вечно благодарен.
Просмотр статистики:

За 24 часа: 1

За 7 дней: 4

За 30 дней: 9

За всё время: 16,312