Почините Свои Вещи Сообщество Магазин

Wi-Fi only version of Apple's 2nd generation iPad Air. Model A1566.

214вопросов Показать все

Опции

Touch ID after emmc flash replacement

Hello there

I have problem with my iPad air 2 wifi model. Afletr update I got error and apple service diagnose my iPad as damaged flash memory, I don't have warranty. I just wonder if I will replace emmc flash on my own will touch ID still works ? I can buy new already programmed emmc but problem is that this flash has other serial number then my iPad and I dont know if this will kill my touch id.

What do you think ? Thanks for any advices

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет
Оценка 0
1 Комментарий

Thanks for reply Minho, I already seen this site but shipping costs to my country are higher then emmc chip itself :/ so if I will solder emmc with other serial touch id will not work ? I know that if I change whole motherboard touch id will not work but I wonder maybe there is some id controller on motherboard which will allow to work finger print scanner even with emmc with other sn ?

из

Добавить комментарий

2 Ответов

Фильтр:
Самые полезные Самые новые Самые старые
Выбранное решение

Опции

If you are referring to replacing the NAND memory chip on the logic board, some suppliers (VIPProgrammer I believe) offer to program it in advance with your device's serial number. This will allow your device to work properly but you obviously lose all of the data you had originally. Hopefully you have a full backup in iTunes or iCloud.

Replacing the NAND requires micro-soldering with good quality tools and plenty of experience.

Был ли этот ответ полезен?

Да Нет
Оценка 3

3 Комментариев:

Thanks for reply Minho, I already seen this site but shipping costs to my country are higher then emmc chip itself :/ so if I will solder emmc with other serial touch id will not work ? I know that if I change whole motherboard touch id will not work but I wonder maybe there is some id controller on motherboard which will allow to work finger print scanner even with emmc with other sn ?

из

The Touch ID SN# (on the home button) must match the NAND and CPU.

из

Thanks, as you advised I will order from vip programmer with my serial, thanks a lot for your help :)

из

Добавить комментарий

Опции

In which website I purchase new sn#

Был ли этот ответ полезен?

Да Нет
Оценка 0
Добавить комментарий

Добавьте свой ответ

sofles будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 3

За всё время: 639