Почините Свои Вещи Сообщество Магазин

Дата выхода 19 сентября 2014 года. Это маленькая версия iPhone 6 Plus с 4.7-дюймовым экраном.

4994вопросов Показать все

Опции

I have a question my friend

hi friends

I just repaired a u2 ic on iphone 6

Reparation success

I wanted to ask you if the original glue black on u2 ic on the picture 1

Question: what is it used for

To solidify the weld ??

If so I can put uv solder mask as in picture 2

thinkss :)

Block Image

Block Image

Mise à jour (29/07/2017)

Thank you my friend for your answer then I can cover the u2 ic with mechanic uv solder mask (green color)

For welding to be consolidated

see picture for example

Block Image

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет
Оценка 1
Добавить комментарий

1 ответ

Фильтр:
Самые полезные Самые новые Самые старые
Выбранное решение

Опции

Components which have a covering over them are either sensitive to moisture in the air or have high enough voltages which can short out the component or other nearby logic.

As an example a MOSFET has a low & high voltage side which if shorted can burn it out.

It's important to re-recover them with the correct sealer as you don't want something that can be removed later if needed, and you want something thats quick! UV gasket material like Vitralit FIPG 60102 is a good choice. Using a UV light cures it within seconds. UV masking material also works its tends to be on the thinner side and a bit more expensive.

Tip: store your unused tube in a metallic antistatic bag which is UV opaque.

Был ли этот ответ полезен?

Да Нет
Оценка 3

6 Комментариев:

Thank you my friend for your answer then I can cover the u2 ic with mechanic uv solder mask (green color)

For welding to be consolidated

see picture 3 for example

thinks

из

I guess our terminology is a bit different!

The green material is not flexible or easy removed its for recovering the PCB when you do trace repairs. It is not the material to use here! You want a rubbery material which is not as hard as the green PCB repair covering material (bond).

Think: gasket - soft Vs bond - hard

из

So that advises me to cover the u2 ic after replacement

из

Yes, any potted chip needs to be re-potted!

из

What product to put on the chip to cover it

из

Показать 1 больше комментариев

Добавить комментарий

Добавьте свой ответ

Mike Plouvin будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 94