Перейти к основному содержанию

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203вопросов Показать все

Won't power on - at all. What to do/replace?

School computer for student use was brought to me with complaint: running on battery-only, unexpectedly powered down. I charged with known-good outlet and power adapter for over 24 hrs. At first the magsafe light would alternate green-orange, later only a VERY dim green glow. Pressing the power button has no noticeable effect - no noise or light. I've reset the SMC numerous times; swapped the RAM around; tried with and without battery.

Condition: magsafe port is clean; some damage to the case - probably voiding Applecare - topcase is raised somewhat near IR receiver, bottom case has hairline crack near join of topcase to left of trackpad (damage appears old); power button is SLIGHTLY depressed (but has satisfying click feel when pressed).

From reading here, I'm guessing it may be the mag safe board or topcase - but I don't know which is more likely, or maybe something else.

Suggestions?

BTW, this site is awesome!

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 1
1 Комментарий

I replaced the MagSafe board and it's now working! Thank you.

из

Добавить комментарий

2 Ответов

Выбранное решение

I'd go for a new MagSafe Board, as it doesn't work, even when plugged in and battery removed.

See here:

MacBook MagSafe DC-In Board

Cheers,

deSteini

MacBook MagSafe DC-In Board Изображение

Продукт

MacBook MagSafe DC-In Board

$19.99

Был ли этот ответ полезен?

Оценка 1

1 Комментарий:

Thank you. I've ordered the DC-In board.

из

Добавить комментарий

Swap in a new battery and try that, if not, I'd think the mag safe board.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

David A будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 3

За всё время: 1,575