home button not working but work if I jump the 2 prong

Question

iPad 3

The third generation of the Apple iPad, released on March 16, 2012. Full 4G and Wi-Fi model repair guides. Repairs require heat and careful prying. Model numbers: A1416, A1430, and A1403.

310вопросов Показать все

Reparactif @reparactif

Репутация: 181

reparactif

5

Опубликовано: 12 сен 2017 г.

Опции

home button not working but work if I jump the 2 prong

hi replace an digitizer of an ipad 3th and the home button is not working but if i jump the 2 gold prong where the home button make is contact the lcd open...

i tried an other home button and usb flex same problem

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

2 Ответов

robert_miranda @jedimaster Репутация: 61 1 · Answer 1 · 2017-09-12T09:07:22-07:00

Наиболее полезный ответ

robert_miranda @jedimaster

Репутация: 61

1

Опубликовано: 12 сен 2017 г.

Опции

Hello, most commonly, the home button module on the digitizer is not aligned properly. It is important to check the orientation of how the old home button was installed on the old or original digitizer that was removed. If you have aligned it properly, I would highly recommend for you to order a new home button.

Был ли этот ответ полезен?

Да Нет

Оценка 1

Добавить комментарий