Screen does not turn on at all (tried replacing charging port as well)

Question

iPhone 6

Дата выхода 19 сентября 2014 года. Это маленькая версия iPhone 6 Plus с 4.7-дюймовым экраном.

4994вопросов Показать все

robert7kim7 @robert7kim7

Репутация: 1

Опубликовано: 19 сен 2017 г.

Опции

Screen does not turn on at all (tried replacing charging port as well)

I had replaced my sister's battery recently as it was starting to lose its charge very quickly. However, in a month or so, she comes back with a broken phone that does not turn on or is recognizable to itunes either.

She told me she had used a portable fan that plugs into the bottom of the phone (a cheap chinese brand I think) which I speculated is what caused the damage to the phone. What do you guys think? Or, it's just coincidence and happened to died right after.

But anyways, so I thought it was the charging port that broke. So I replaced that, and still no luck. Also, tried hard resetting as well. If you guys could give any ideas on this, that'd be incredible!

Thanks,

Robert

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

3 Ответов

Выбранное решение

Minho @refectio

Репутация: 221,4к

15

289

807

Опубликовано: 19 сен 2017 г.

Опции

You're probably right. Cheap peripherals can draw too much current or cause voltage spikes that damage the charging circuit (Tristar).

This will have to be repaired by a shop that does micro-soldering work.

Был ли этот ответ полезен?

Да Нет

Оценка 3

5 Комментариев:

Thank you for the response. How much do you think it would cost to repair that?

19 сен 2017 г. из robert7kim7

Dealing with a reputable micro-solderer will cost you about $100 - $150. Some may charge more and some less.

There are a few reputable micro-solderers who frequent this forum or you can search Google. You can check out my profile if you'd like, at the very least it will serve as a data point

19 сен 2017 г. из Minho

@mayer @oldturkey03 not sure if this is okay...but answering a direct question. Let me know.

19 сен 2017 г. из Minho

Robert Actually this is just the type of repair that Minho specializes in. @refectio You're fine with me, you didn't recommend yourself or post your web link (which is in your profile), right?

19 сен 2017 г. из mayer

@refectio @mayer looks good to me as well.

19 сен 2017 г. из oldturkey03

Добавить комментарий

Thank you for the response. How much do you think it would cost to repair that? — robert7kim7
Dealing with a reputable micro-solderer will cost you about $100 - $150. Some may charge more and some less.

There are a few reputable micro-solderers who frequent this forum or you can search Google. You can check out my profile if you'd like, at the very least it will serve as a data point — Minho
@mayer @oldturkey03 not sure if this is okay...but answering a direct question. Let me know. — Minho
Robert Actually this is just the type of repair that Minho specializes in. @refectio You're fine with me, you didn't recommend yourself or post your web link (which is in your profile), right? — mayer

joel rakich @ripper Репутация: 257 4 1 · Answer 1 · 2017-09-19T17:45:39-07:00

joel rakich @ripper

Репутация: 257

4

1

Опубликовано: 19 сен 2017 г.

Опции

Have you checked voltage on the battery? Maybe the new battery was junk and died already, especially if it was an ebay part. Use a multi meter on the outer pins of the battery connector. Report back what you find.

Был ли этот ответ полезен?

Да Нет

Оценка 1

1 Комментарий:

Good point !

19 сен 2017 г. из Minho

Добавить комментарий