iPhone wont turn back on after screen replacement.

Question

iPhone 6s

Дата выхода 25 сентября 2015 г. Модель A1688 / A1633. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 64 или 128 ГБ памяти; в цветах: Серебристый, Золотой, «Серый космос» и «Розовое золото».

2690вопросов Показать все

John Young @johnyoung19152

Репутация: 1

Опубликовано: 26 сен 2017 г.

Опции

iPhone wont turn back on after screen replacement.

Recently, my daughter dropped my iPhone on the floor and completely cracked my screen, my phone was already on 1% due to me not charging it that day, however as my daughter dropped it, it had long line going down the screen which told me the screen was broken,

As I thought the battery was dead I went back home and charged it, and it wouldn't turn on,

I ordered a new screen replacement and completed this myself and it didn't work, wondering if anyone has any suggestions on why this might be?

Thanks.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

1 Комментарий

when you put the screen on did you make sure the battery was reconnected properly

26 сен 2017 г. из daniel

Добавить комментарий

2 Ответов

Выбранное решение

Minho @refectio

Репутация: 221,4к

15

289

807

Опубликовано: 26 сен 2017 г.

Опции

Is your phone recognized if you connect it to an iTunes enabled computer? If so, then you may just have a bad replacement screen.

If the phone is not recognized, then either you have a logic board issue that was caused by the drop or perhaps the screen is causing issues. The best way to troubleshoot that is to disconnect the screen, cameras...everything except the battery and Dock. Then connect to iTunes. If it is not recognized, then you most likely have a logic board issue. This would require a micro-soldering repair and is not a DIY fix.

Был ли этот ответ полезен?

Да Нет

Оценка 2

Добавить комментарий