Перейти к основному содержанию

Add a SATA SSD to my iMac as a second HD (Already has blade SSD)

I didn't find any upgrade kit for 2017 iMacs. I know for 21.5 SSD-only iMacs, there should be a standard SATA connector at the back of the logic board, but what about the power? Which power cable should I use? Also where should I get the rubber bumper? Any help is appreciated!!

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
1 Комментарий

Are you sure you want to void your warranty at this time?

из

Добавить комментарий

1 ответ

Наиболее полезный ответ

I agree with @mayer - I would wait until your warranty has expired. I also think you can get a better solution externally than adding in an internal 2.5" drive.

Just so you can see how much work it is review this IFIXIT guide: iMac Intel 21.5" Retina 4K Display (2017) Logic Board Replacement You'll need to get to Step61 so you can plug in the SATA & power cable on the back side of the logic board.

As far as the needed parts you can use the older 2015 SATA & power cables Apple is using the same cables here. The rubber cups are different which will be difficult to get presently.

Был ли этот ответ полезен?

Оценка 2

1 Комментарий:

I cannot seem to find the right cable. The only 4 pin power cable I found promising is this one "https://www.aliexpress.com/item/Brand-NE.... Can you give me a link to the right cable? Thanks!

из

Добавить комментарий

Добавьте свой ответ

Zhenfu Shi будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 131