Нow to disassemble the case and replace the battery?

If anybody is still interested in this, I recoded my process of replacing the batteries in a Braun Cruzer3: http://spbnick.github.io/2016/06/24/Brau...

Был ли этот ответ полезен?

Да Нет

Оценка 1

1 Комментарий:

Thanks, I put two Eneloops into my Cruzer3 a few weeks ago and since then it works well again. I placed two flat springs (salvaged somewhere) into the gap at the negative contacts, no soldering required.

19 мая 2019 г. из Mathias Katzer

Добавить комментарий

Thanks, I put two Eneloops into my Cruzer3 a few weeks ago and since then it works well again. I placed two flat springs (salvaged somewhere) into the gap at the negative contacts, no soldering required. — Mathias Katzer

oldturkey03 @oldturkey03 Репутация: 812,9к 1,2к 920 2,4к · Answer 1 · 2011-02-10T07:34:38-07:00

Наиболее полезный ответ

oldturkey03 @oldturkey03

Репутация: 812,9к

1,2к

920

2,4к

Опубликовано: 10 фев 2011 г.

Опции

Cameron Frye, still trying to find an English version but here is something interesting. http://www.service.braun.com/line/SH/S57... it shows the picture on page 8 how the batteries are changed but in Chinese and was omitted on the English version. Hope it will get you started until we find something in English

Был ли этот ответ полезен?

Да Нет

Оценка 3

2 Комментариев:

wow... that's research!

10 фев 2011 г. из pollytintop

Thanks for your help :)

11 фев 2011 г. из Cameron Frye

Добавить комментарий