Camera stuck on AUTO setting
I recently replaced the top lcd, rear lcd and after not being able to solve this issue, I then replaced the entire top section of the camera.
The fault lies with the camera working perfectly fine, however it only works in AUTO mode. No matter what I turn the dial to it wont go into M,A,S or P or scene, U1 or U2 or no flash.
Factory reset has been done, firmware is the latest too.
Any ideas?
ΠΡΠΎ Ρ ΠΎΡΠΎΡΠΈΠΉ Π²ΠΎΠΏΡΠΎΡ?
Π‘ΡΠ΅Ρ
0
