Дата выхода 19 сентября 2014 года. Это маленькая версия iPhone 6 Plus с 4.7-дюймовым экраном.

4418 Questions Показать все

iPhone 6 shuts off when touch ID is connected and cannot turn on

UPDATE: I found out that it's the actually home button that is causing the problem. I will test this theory again by switching the home button with another

Here's a mystery puzzle for all you iPhone repair experts. This might be obvious but I couldn't find any similar situations googling it so I'll ask. I'm not so familiar with iPhones specifically but I dabble in electronics repair so I may be missing something completely that is iPhone specific. Here's the story:

This iPhone was fully submerged in a dirty river for probably 30 seconds to a minute. It was still on when retrieved and I turned it off immediately. I gave it back to the owner of the phone and told her not to turn it on or charge it. She turned it on. It powered on and slowly died. She put it in rice since we are in the boonies with no tools. I thought for sure the phone was a goner.

I got back home the next day and opened it up. I let it dry and it looked clean. It didn't power on. I tried multiple screens and batteries to no avail. I tried different things for 4 days straight and all of a sudden, the phone awoke from the dead! I had no idea why or how. I charged the new battery and messed with the phone a bit switched LCD's with another phone since 2 girls fell in the water both with iphone 6's and I am trying to fix both. It seemed like it was random when it would work. Then I noticed something. When I switched LCD's, the phone would restart. Still confused. I looked deeper and realized that when I disconnect the touch ID, the phone won't start or will shut off if connected while on.

What is this? Is this normal? Is it some sort of security measure? The LCD and touch ID are the orginals with that phone. Is it because I tested it on another phone? If it is, that is confirmation as to why I will never use an iPhone along with 500 more reasons.

Please help me knowledgeable people!!!

Thanks

Отвечено! View the answer У меня та же проблема

Это хороший вопрос?

по рейтингу 0
Добавить комментарий
Spread Fixmas Cheer
Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
Spread Fixmas Cheer
Получите $12 за покупку от $50 и выше с промокодом FIXMAS12

3 Ответов

Выбранное решение

The problem was the home button and/or flex cable. Still trying to work out the testing details

Был ли этот ответ полезен?

по рейтингу 0
Добавить комментарий
Наиболее полезный ответ

Hi Charles Choi,

i think there is a deeper water damage. In my opinion there is no way to fix ist. If the device dosn´t start if the Home button is not connected, theres definitively a problem on the logicboard...i think some corroded components or some blown fuses.

Был ли этот ответ полезен?

по рейтингу 1

Комментарии:

Could a short be the cause of this? If so, couldn't I just replace the component(s)? I've never microsoldered before but I'd love to learn. I really enjoy fixing stuff for cheap. Sure beats buying a new board.

от

yes, i think so...

if you want to learn something about microsoldering, you must invest a lot of it.

At the beginning i would go to a pro and ask him to take care of it or ask him if he give you some helpful tips.

от

It was the home button that was the issue. I have to now figure out if it's the actual button or the flex cable. Just out of curiosity, do you know how a home button and/or flex cable could be causing this problem?

от

Добавить комментарий

I mee to have a problem in this

Был ли этот ответ полезен?

по рейтингу 0

Комментарии:

I don't know if you have the same issue as me but I switched the home button and it can turn on and stay on now. Worth a test

от

Добавить комментарий

Добавьте свой ответ

Charles Choi будет вечно благодарен.
Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 8

За всё время: 97