Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Model A1502 / 2.4, 2.6, or 2.8 GHz dual-core Intel processor / Released October 2013

508вопросов Показать все

MacBook Pro late 2013 13” PPN001 PFM006 fan at full speed and slow

My MacBook Pro late 2013 suddenly became slow and fun running at full speed, due to the region I’m in there is no autorized apple support store, went to a apple reseller and they told me that the battery is causing the problem due to old age and 1030 more cycles. I have TP showing that the battery is actually at good condition but GPU temperature senseor might not be working properly and coconut battery app showing the battery in good condition. Used the apple diagnostic and got PFM006 and there many be an issue with the power management system ref code PPN001, which I can’t find any of this ref code.

PPN001 not typo see photo.

Block Image

Any ideas, please

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 3
Добавить комментарий

2 Ответов

Наиболее полезный ответ

This error is often related to liquid damage (corrosion around the battery connector). Did you have a spill or sit the system down on a wet surface? It’s also possible the area where you live is very humid which can also cause issues.

Был ли этот ответ полезен?

Оценка 1

Комментарии:

Hi dan, thanks for answering, I just went to another store, they opened the back case, and one of the six pack is inflated, do you think it is posible that this is the reason? They still insist that changing the battery will fix it.

I was living in a very dry region and traveled to a quiet humid region for a week when the problem started, will changing the battery solve the problem?

Thanks again.

из

Yes a swollen battery does need to be replaced!

из

Добавить комментарий

Same problem happend to my MBP 11,1. The battery pack is OK. Tried with refit and SmcFasher.efi -reset 1 to reset my SMC, because Shift-Ctrl-Alt didnt work. SMC reset via refit has no effect. Think, that my Logic board is broken

Был ли этот ответ полезен?

Оценка 0

Комментарии:

Guys try replacing the keyboard.

из

@jethro1000 - Altering the firmware to fix a bad keyboard is not a smart thing! Sounds like you has a liquid spill and you need to replace the keyboard and/or trackpad

из

Thank you very much - same problem was with my Mac and replaced touchpad fixed it.

из

Добавить комментарий

Добавьте свой ответ

Marco Antonio Valdivieso будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 11

За последние 7 дней: 73

За последние 30 дней: 432

За всё время: 8,961