Skip to main content

Tasto home click not work

Block Image

Block Image

iPhone 7 home button after lcd replacement, have damaged ic U10 by shorting the button. Looking under the microscope the home button, I notice that the integrated u10 was chipped, so I replace it with a new one. the button is now recognized but the click does not go, I changed 2 Ic but without solving. on the flat home button I have all the voltage drops. What could it be ? flex damaged?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

по рейтингу 0
Добавить комментарий

iPhone Battery Fix Kits

Only $29.99

Buy Now

iPhone Battery Fix Kits

Only $29.99

Buy Now

1 Ответ

Наиболее полезный ответ

It looks like the flex sustained some damage when you removed the IC. I would double check the condition of the flex and if you have another U10 IC, try that as well.

Был ли этот ответ полезен?

по рейтингу 1

Комментарии:

I replaced u10 without solving. the flex visually does not seem damaged. and I have all the resistors on the fpc touch id connector

от

Добавить комментарий

Добавьте свой ответ

man_fry будет вечно благодарен.
Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 26