AK PRO 5 in1 Laminating Machine Bubble Problem

Question

iPhone 7

Выпущен 16 сентября 2016 года. Модель 1660, 1778. Стандарты связи GSM или CDMA. Память 32, 128 или 256 ГБ. Цвета: розовое золото, золотой, серебристый, черный и глянцевый черный.

2266вопросов Показать все

AGS @ags_studio

Репутация: 243

6

22

Опубликовано: 6 сен 2018 г.

Опции

AK PRO 5 in1 Laminating Machine Bubble Problem

Hi Everyone.

I bought AK PRO 5 in 1 for Laminate iPhone Broken LCD.

The problem is the Bubble.

I try it with same Parameters suggest form reseller, but the problem is same.

I change the temperature do different setting but the problem is same.

Is someone use a same machine who suggest me something…

The setting I use is :

Vaccum Time : 15 SEC

Lamination Time 15 SEC

Outgassing Time : 5 SEC

Debubbling Time : 6000, SEC

Temperature : 40 C.

The Modul who i use when i put the LCD inside the machine black (check the PIC)

Thanks

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

4 Комментариев:

I

have same problem but i use 4in1 glasses and i always get pressure bubbles. Any ideas why ? I use same akpro.

7 июл 2019 г. из arnasseip

I have the same problem with Ak pro. Always I have bubbles, with frame, without frame, 3 in 1, 4 in 1. I don’t know why. Thanks to any recommemdation

17 дек 2019 г. из David Alonso

I am having problems with my AK pro machine, it no longer lock and there is no pressure in the machine

22 ноя 2023 г. из Collins Ilondu

perhaps you have problem whith inside pump

27 ноя 2023 г. из Marco

Добавить комментарий

1 ответ

I

have same problem but i use 4in1 glasses and i always get pressure bubbles. Any ideas why ? I use same akpro. — arnasseip
I have the same problem with Ak pro. Always I have bubbles, with frame, without frame, 3 in 1, 4 in 1. I don’t know why. Thanks to any recommemdation — David Alonso
I am having problems with my AK pro machine, it no longer lock and there is no pressure in the machine — Collins Ilondu