power surged and then the e2 f2 code started flashing

Question

Dishwasher

Repair and disassembly guides and support for dish washing appliances.

707вопросов Показать все

deew1015 @deew1015

Репутация: 13

1

Опубликовано: 25 окт 2018 г.

Опции

power surged and then the e2 f2 code started flashing

My dishwasher is only about a year and a half old. We had a bad storm yesterday...my power surged and then the e2 f2 code started flashing. Did the reset, took the door off and checked connections...still flashing. Do I randomly start buying parts? How do I check to see if it’s something I can fix? I am handy, but appliances are new territory for me. All info. is appreciated.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 1

2 Комментариев

We have the same model and issue, did you come up with a solution

2 янв 2019 г. из Clay showalter

I have the same model and same problem. Did you get it fixed?

2 фев 2019 г. из Rabin Shrestha

Добавить комментарий

3 Ответов

We have the same model and issue, did you come up with a solution — Clay showalter
I have the same model and same problem. Did you get it fixed? — Rabin Shrestha

score 3 · Answer 1 · 2018-10-25T06:23:27-07:00

Наиболее полезный ответ

mayer @mayer

Репутация: 685,3к

MacHale Enterprises

3,4к

1,1к

2,6к

Опубликовано: 25 окт 2018 г.

Опции

The e2 f2 error usually means main control board is not getting correct signal from the user interface. Turn off power/breaker, remove screws holding inner door liner, remove liner and check/secure/clean all wire connections from front interface and main control board. The number you gave me an oven, please check it for accuracy.

Был ли этот ответ полезен?

Да Нет

Оценка 3

Добавить комментарий

Abrsvc @abrsvc Репутация: 4,1к ABR Services 3 2 · Answer 2 · 2018-10-25T04:46:18-07:00

Abrsvc @abrsvc

Репутация: 4,1к

ABR Services

3

2

Опубликовано: 25 окт 2018 г.

Опции

In cases like this, the control module has been effected. This can be as simple as an open internal fuse or more complicated like a smoked controller IC. In either case, knowing the exact make and model is critical. Please update this with the make and model. Also, a Google search of the model number and the keyword “parts” should get you to a site to check for parts availability. If you can post a picture of the control module, we may be able to see a damaged part that can be replaced as a start.

Dan

Был ли этот ответ полезен?

Да Нет

Оценка 1

1 Комментарий:

Thank you. I’m adding a comment below with some pics.

25 окт 2018 г. из deew1015

Добавить комментарий