I am having the same issue; no heat. Figure it's the fuse, the wire connection, the thermostat or the heater itself. Anyone have a manual for the 110.c83902200? It was sold in Canada. Am looking to confirm correct parts numbers for ordering on Amazon.
Это хороший вопрос?
Репутация: 685,3к
3,4к
1,1к
2,6к
Cause 1
Thermal Fuse
The thermal fuse is a safety device designed to protect the dryer from overheating. The fuse is located on the blower housing or at the dryer’s heat source such as the heating element on electric dryers or at the burner on gas models. The fuse should be closed for continuity meaning it has a continuous electrical path through it when good. If overheated the fuse will have no continuity meaning the electrical path is broken and the fuse has blown. A multimeter can be used to test it for continuity. Be aware that a blown thermal fuse is an indication of a restricted exhaust vent from the dryer to the outside. Always check the dryer venting when replacing a blown thermal fuse.
https://www.repairclinic.com/PartDetail/...
https://www.repairclinic.com/PartDetail/...
Go here to download the PDF Service Manual
Был ли этот ответ полезен?
My dryer is electric, so it won’t be any gas related component. I’m going to open it up now and do a visual inspection. I’m guessing the heating elements are shorted. While I’m in there could I bypass the fuse to see if it’s blown? I don’t have a meter to test it.
За последние 24часов: 0
За последние 7 дней: 0
За последние 30 дней: 0
За всё время: 316
