Перейти к основному содержанию

The G4 Quicksilver came in 533MHz, 667MHz, 733MHz, 800MHz, 933MHz, And 1.0GHz speeds.

49вопросов Показать все

power light goes off when released

when turning g4 on the motherboard lights up,fan comes on but light on front goes off

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка -1
Добавить комментарий

1 ответ

Выбранное решение

Unplug the machine and all peripherals. Press and hold the start button for 10 seconds. Replace the 3.6 volt lithium 1/2 AA PRAM battery on the logic board if it's been over 3 years. Plug it back in. With the door open, press the reset button on the logic board with a pencil eraser. Let us know your results or any changes. Pray.

Был ли этот ответ полезен?

Оценка 3
Добавить комментарий

Добавьте свой ответ

rev frank currier будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 2

За последние 7 дней: 2

За последние 30 дней: 4

За всё время: 1,366