How to test a water damaged 6S - test points

Question

iPhone 6s

Дата выхода 25 сентября 2015 г. Модель A1688 / A1633. Ремонт данного устройства схож с предыдущими моделями, требующий отвертки и инструменты для вскрытия. Доступен в версиях GSM или CDMA; с 16, 64 или 128 ГБ памяти; в цветах: Серебристый, Золотой, «Серый космос» и «Розовое золото».

2690вопросов Показать все

Jon Smith @gadgetuser

Репутация: 1

2

4

Опубликовано: 13 мая 2019 г.

Опции

How to test a water damaged 6S - test points

So I have a 6S which has been totally submerged In water and unfortunately the person did try to turn the phone back on, and did not do anything special to try to get the moisture out. I have looked at all, or at least in all the places which I could access with a microscope and no components seems to have any obvious damage to me, except maybe U5411_RF and / or C5403_RF, but thats a maybe ?

I have cleaned the motherboard in alcohol.

Anyway, the phone does not boot up and does not respond at all when powering the phone from either a battery or with a charger.

So where could I start measuring, at which components and places would be suitable to start testing?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

1 ответ

Выбранное решение

Chris Stables @imicrosoldering

Репутация: 50,7к

8

14

101

Опубликовано: 14 мая 2019 г.

Опции

Firstly I would check for a vcc main short. It most likely will have one. How you track it down depends on what tools you have. Freeze spray, flir cam or the old fashioned way with your tongue.

C4127 would be the best to check vcc main.

Был ли этот ответ полезен?

Да Нет

Оценка 1

1 Комментарий:

Thanks for your answer. Can't I measure with a multimeter? Which components do you recommend to check first if I want to check for a VCC main short?

I am not skilled in this particular area, only a little bit in electronics in general, but I would like to give it a try anyway, thats my only option at this point.

15 мая 2019 г. из Jon Smith

Добавить комментарий

Thanks for your answer. Can't I measure with a multimeter? Which components do you recommend to check first if I want to check for a VCC main short?

I am not skilled in this particular area, only a little bit in electronics in general, but I would like to give it a try anyway, thats my only option at this point. — Jon Smith

iPhone 6s

How to test a water damaged 6S - test points

1 ответ

Update (05/16/2019)

Добавьте свой ответ