So, i recently just replaced an iphone 6 screen… but, i didnt unplug the battery before taking the screen off, although i shut the phone down, it still wont turn on. Any help?
Это хороший вопрос?
Репутация: 102,6к
10
54
291
Shine a bright light to your screen in a darker environment, if you see a dimmed image it means the backlight got probably shorted. If that was the case, it would require a microsoldering repair to get it back working. If available try plugging back your old screen too, to confirm it’s not just a faulty screen.
Был ли этот ответ полезен?
Репутация: 23
1
Make sure all flex cables are in tacked and placed in the right place, i have accidentally got them confused before with the iPhone 6 since its 4 flex cables such as the camera, screen, touch digitizer, and home button all in one place. If done correctly should turn on if they are secured and in the right spot. Also try holding power button and home button to force reset or put it in DFU mode might need to factory reset the phone with iTunes. Check if iTunes reads the phone if not you might have a charging port problem as well. If you have a multi-meter you can also check if its getting power to the battery or not. There is a range of different problems that could occur, you just have to keep trying trial and error because there no one answer on why it wont turn on.
Был ли этот ответ полезен?
За последние 24часов: 0
За последние 7 дней: 0
За последние 30 дней: 0
За всё время: 39
