boiler does not kick,s on despite pilot is on and thermostat up

Question

Water Heater

Repair guides and support for gas and electric hot water tanks, boilers and household heat exchangers.

31вопросов Показать все

yefim rabinovich @yefim877

Репутация: 1

Опубликовано: 22 окт 2019 г.

Опции

boiler does not kick,s on despite pilot is on and thermostat up

i do have W Mclain force hot water system boiler in the house.pilot is on, thermostat all way up and i do have 120V on T1&T2 in relay but nothing happens

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

1 ответ

score 1 · Answer 1 · 2019-10-22T08:50:41-07:00

Наиболее полезный ответ

mayer @mayer

Репутация: 685,4к

MacHale Enterprises

3,4к

1,1к

2,6к

Опубликовано: 22 окт 2019 г.

Опции

Pressure Switch

The pressure switch closes when the proper airflow is achieved, signaling the control board to continue the ignition process. If the pressure switch is defective, the ignition process will stall, and the water heater will not light.

Thermocouple

The thermocouple detects the pilot flame. If the thermocouple does not detect a flame, the ignition process will stall, and the burner will not light

Был ли этот ответ полезен?

Да Нет

Оценка 1

1 Комментарий:

this is force hot water system.pilot is on so thermocouple is ok

22 окт 2019 г. из yefim rabinovich

Добавить комментарий

Water Heater

boiler does not kick,s on despite pilot is on and thermostat up

1 ответ

Добавьте свой ответ