Перейти к основному содержанию

iPod Classic 6th Generation. Model A1238 / 80, 120, or 160 GB hard drive / black or silver metal front

Help with Testing iPod Classic logic board with a multimeter

Guys I have a pristine ipod 80gb . It doesn't power on .

So far tested

Display works finne

Harddrive is fine

New Battery

Clickwheel is fine

Tried connecting to the wall charger without battery

I'm really tired need help solving this .

How do I test the board with a multimeter to check if it's shorted out or not

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

Ответов (1)

Наиболее полезный ответ

@johnwick90 extremely difficult to do since there are no schematics for the iPod. You can check the 30 pin dock connector wiring and see if that is working properly. Check the battery connector on the board since that is a weak spot on those boards. Make sure it is connected properly etc.

Был ли этот ответ полезен?

Оценка 2

2 Комментариев:

Thanks for replying I had seen your old post I had checked the fuse

The power management IC

USB port

Battery connector

All of them are fine. I just don't know what's wrong with the board

из

Check the coils around the power management IC's and battery connector

из

Добавить комментарий

Добавьте свой ответ

John будет очень признателен(а).
Статистика просмотров:

За последние 24 час(ов): 0

За последние 7 дней: 0

За последние 30 дней: 5

За всё время: 426