Перейти к основному содержанию

Repair and support for the controllers that shipped with the PS3. Released in November 2007 (Japan only) and 2008 (other countries), the six-axis lithium battery powered controller (CECHZC2) is straightforward to repair.

157вопросов Показать все

Dualshock 3 CECHZC2E A1 bad charge port

Hi, I need some help.

I couldn’t find any guides on the Internet on how to change the charge port on this specific motherboard and model of Dualshock 3. I add some photos so you can see it:

Block Image

Block Image

Block Image

Block Image

Thanks.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Выбранное решение

Hi Rufino,

It’s soldered on the motherboard!

You need to de-solder the old one and solder the new one back in. It’s not really difficult to do it, you just need to follow the solder points and remove the solder from it to get it out.

I could make a guide for you, for how to do it, when I receive one which has a faulty USB connector.

Был ли этот ответ полезен?

Оценка 2

8 Комментариев:

Thanks for answering. But where are the solder points? I couldn't find them.

из

Could you make a picture of the backside of the USB connector? To add: I think it's on top side of the motherboard.

из

It's in the pictures I posted, you can see it here: https://d3nevzfk7ii3be.cloudfront.net/ig...

из

I meant the backside of the port on the front side of the motherboard! Sry!

из

Показать 3 больше комментариев

Добавить комментарий

Добавьте свой ответ

Rufino Serrano будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 10

За всё время: 257