Перейти к основному содержанию

Выпущено 21 сентября 2018 г. Модели A1921, A2101, A2102, A2104. Доступен как GSM, CDMA / eSIM или nano-SIM / 64, 256 или 512 ГБ / серебристый, золотой или космический серый. (Произносится как «iPhone 10 S Max.»)

376вопросов Показать все

Will Face ID work after replacing logic board?

Will Face ID work after replacing only the logic board on an iCloud locked iPhone Xs max?

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 1
1 Комментарий

hi replaced a mainboard for an iphone 13pro max as the mainboard was malfunctioning and when connect it to "3utools" it says all parts are functioning as normal. but it says " unable todetermine if your iphone a genuine apple part" It says this for the front camera , battery, face IDand display. but when connected to "3utools " as well any other software to test the parts. I get 100% functionality. is this a software issue ?? or somthing esl?

из

Добавить комментарий

1 ответ

Выбранное решение

You would need to transfer the Earpiece Speaker and Front Sensor assembly plus the front camera assembly to keep face ID

Был ли этот ответ полезен?

Оценка 2

3 Комментариев:

Are there any videos or guides on doing this?

из

@mochastring IFixit has a replacement guide on the ear speaker but not sure about the front cameras. I would also watch some videos on you tube. The most important thing is to take your time and be very careful not to damage the flex cables.

из

@mochastring Actually a screen replacement guide of iPhone X and above usually covers the transferring of the Face ID parts.

из

Добавить комментарий

Добавьте свой ответ

Taiwera будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 6

За последние 30 дней: 12

За всё время: 988