Почините Свои Вещи Сообщество Магазин

Apple выпустила смартфон 4 ноября 2017 года в двух различных конфигурациях: A1865, A1901 и дала название iPhone X. Доступны варианты с разными стандартами мобильной связи: GSM или CDMA; с двумя объемами хранилища: 64 или 256 Гб; двумя различными оттенками корпуса: серебристый и Space Gray.

1199вопросов Показать все

Опции

iPhone X touch not working ; missing caps and filters

Hello iFixit, I recently received an iPhone X for repair because it had no touch. I inspected the board under the microscope and found out that there are some missing filters and capacitors. As I do not have any donor boards for the caps and filters, I wanted to know is there any way to fix the no touch issue?

The filters and caps missing are :

C5809 (SPI_AP_TO_RACER_MOSI_CONN) ;

FL5891 (PP5V25_TOUCH_VDDH) ;

C5807 (SPI_AP_TO_RACER_SCLK_CONN) ;

FL5860 (HALL2_TO_AOP_IRQ_CONN_L) ;

C5842 (PMU_TO_TOUCH_CLK32K_RESET_CONN_L)

Any help, would be highly appreciated! :)

Update (11/05/2020)

Just need to get the phone’s touch working so If anyone could please help me in what needs to be replaced or jumped :)

Thanks in advance!

Block Image

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет
Оценка 1
Добавить комментарий

2 Ответов

Фильтр:
Самые полезные Самые новые Самые старые
Выбранное решение

Опции

You will at least need to replace the filters. Even after replacing the filters you still might not have touch.

How did they become removed to start with?

I would start by checking the touch connector and filter pads for proper diode readings. I would suspect an open line on one of the circuits which will require you to separate the board.

Был ли этот ответ полезен?

Да Нет
Оценка 1

4 Комментариев:

I suspect the previous technician might have somehow gotten the filters to be fallen, i guess he was using a hot air gun to separate the board that might have caused the filters to fall off.

I checked the touch connector where I am getting improper diode reading and the filter pads as well have improper readings.

из

@iammyron07 Next step would be to separate the board and check the pads on the other side.

из

@imicrosoldering Just checked, the pads on both the layers seem fine to me, No ripped pads as such. Really confused with this one.

из

@iammyron07 Take some readings of the corresponding pads on the top layer. This could be a heated CPU.

из

Добавить комментарий

Опции

If filter is missing you can jump with wire.I also got and iPhone x with track broken fix with lower board swap.If the iPhone was dropped one there must be other issues.After replace filter if still not working try this once iPhone X touch fix by me may helpful for you.

Был ли этот ответ полезен?

Да Нет
Оценка 1
Добавить комментарий

Добавьте свой ответ

Myron. будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 5

За последние 30 дней: 21

За всё время: 935