Почините Свои Вещи Сообщество Магазин

The smaller of Apple's MacBook Air laptops featuring dual microphones and 802.11ac Wi-Fi connectivity.

149вопросов Показать все

Опции

I have the black screen of death

I initially did an erase and install with disk utility and the computer booted up fine.

The next day I got the blinking question mark in the folder at start up. I restarted and since then I’ve got nothing but the black screen.

I have tried to boot in recovery (command R) I have gone through the NVRAM and PRAM reset protocols. Nothing.

I have created a bootable thumb drive with Mojave on it and tried to boot to the thumb drive. Nothing.

I don’t know what OS is on the device. It may have been High Sierra. I have a new drive, not installed yet, and can make a bootable drive with High Sierra on it. Can any one assist with some step by step instructions as to what can be tried next?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет
Оценка 0
Добавить комментарий

1 ответ

Фильтр:
Самые полезные Самые новые Самые старые

Опции

I think you need to go back one more version as High Sierra is the first release of APFS. You should create a bootable OS installer with Sierra as that’s the last HFS+ release. The systems firmware likely didn’t get updated so it has no idea how to boot up under anything else but HFS+

OK, here’s a link to the older OS versions How to get old versions of macOS Download the Sierra installer

Now format a 32GB Thumb drive with GUID and a journaled file system using your working Mac. Then follow this guide to create the bootable Image How to create a bootable macOS Sierra installer drive

Now give that a try!

Был ли этот ответ полезен?

Да Нет
Оценка 0
Добавить комментарий

Добавьте свой ответ

Matthew Agostinelli будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 5

За последние 30 дней: 6

За всё время: 27