Перейти к основному содержанию

Четвертое поколение iPhone. Ремонт прост, но дисплей должен быть заменен в сборе с сенсорным стеклом. Версия GSM; 8, 16 или 32 ГБ памяти; модель A1332; в Черном или Белом цвете.

2375вопросов Показать все
Вопрос закрыт

iPhone 4 home button works poorly after a small water spill?

Hey all,

New to this site, can't believe a great site like this exists!

So here's my problem...

My girlfriend spilt water on her iPhone 4 (GSM) just so its clear.. about 4-5 months ago.

Ever since the water spill, the phone's home button does not work well.

What do I mean? - Well it does work, but only if you press on it quite hard, specifically the pressing has to target the center upper edge of the button. That is the only way it is functional at all. As you can imagine doing a "hard reset" is a HUGE pain in the butt, because you can never be sure if the home button is activated or not.

I was wondering if simply buying a new home button from this great looking site, along with any other necessary materials will be sufficient to fix this problem?

Well thats about it..

Looking forward to your answers,

Thanks!

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

3 Ответов

Replacing the home button should work for you.

My problem was similar. After almost a year of use, the iPhone 4 home button became less responsive. I had the phone sent for repair and moisture was detected inside the device. As the warranty was void, I decided to replace the button myself. It works like a charm now, responsive as on day one.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

I got the same problem, where was the moisture found? On the home button, or on the sensor for the home button? Is this package enough? [связанный продукт отсутствует или отключен: IF182-017]

Thanks

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

No idea. All I know is the moisture sensor was triggered. This package should be enough. In case it turns out not to be, you could try replacing the dock connector as well.

из

Добавить комментарий

not working at o cant turn on after water

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

If the issue started after water damage you probably only need to disassemble the phone and clean the contact points between the homebutton flex and the connector on the dock connector and clean the back of the button and the frame contact point. This fixes 90% of them.

из

Добавить комментарий
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 7,387