Почините Свои Вещи Сообщество Магазин

Soldering is a method of connecting two pieces of metal together by melting another filler metal in between them. There are many kinds of soldering, but this article is designed to teach you the basics of electrical soldering.

56вопросов Показать все

Опции

Guide for beginer how to remove 8pin chip using solder station

Hi,

I’m new to soldering, I want to learn to remove and replace 8pin chip like this (RED ARROW in photo).

I brought a solder station with blower (hot air station), what is the ideal temperature (Celsius) setting for the blower and the power of the blower airflow?

I tested on a testing board and I somehow blow away the micro transistor (GREEN ARROWS in photo) around the 8pin chip, this is very hard to get right!

Any tips and guide how I should approach this?

Block Image

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет
Оценка 0
Добавить комментарий

1 ответ

Фильтр:
Самые полезные Самые новые Самые старые
Выбранное решение

Опции

Flux, 370c 70% air but it can change with each hot air station

Был ли этот ответ полезен?

Да Нет
Оценка 2

2 Комментариев:

I would use a concentrator nozzle to reduce the area being heated. I ended up modifying a few with even smaller and even a wedge shape orifice.

из

thanks for the advice, yeah i think store brought head/nozzle is still way too big perhaps i need to modified mine also.

из

Добавить комментарий

Добавьте свой ответ

Will будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 4

За последние 30 дней: 5

За всё время: 38