Перейти к основному содержанию

Следующей моделью в линейке после iPhone XS, выпущенной 20 сентября 2019 года, стал iPhone 11 Pro. Он получил 5,8-дюймовый OLED-дисплей, тройную основную камеру и увеличенное время автономной работы.

149вопросов Показать все

I’m ready to throw this phone across the room!

Replacing screen.

I’m on my second screen.

Everything is connected.

# Phone turns on, I can hear and feel the vibrations.

  1. Screen is responding to my touch.
  2. Screen is black, I cannot see anything of the screen and/or a very dimly Apple logo upon start up.
Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
1 Комментарий

I’m so frustrated!! I don’t know what to do

из

Добавить комментарий

3 Ответов

Наиболее полезный ответ

This is the symptom of a faulty ambient light sensor. It might have got damaged during the screen replacement.

Был ли этот ответ полезен?

Оценка 2
Добавить комментарий

hello David,

it seems to be like faulty new screen panel, it happens sometimes. But, most cases (you nothing write about a reason of change) its just a badly inserted screen connector into the port. Don't forget about first important electronic rule - battery firs when unplugging and the last when pluging.

It would be a good practice to go to a nearby repair shop and have your screen checked. It shouldn't cost a lot, just plug it in and check on another phone if it's not working. If, however, we'll wonder later.

Был ли этот ответ полезен?

Оценка 0

2 Комментариев:

Thanks for the reply... I have two screens .. the first didn’t work, so I bought another.. do you think I could have damaged one of the prongs? Causing no light? Idk? It’s sitting away from me right now, as jt is so frustrating

из

it's hard to answer your question without touching the phone. The 11pro model has an OLED screen, so different rules apply here than in the LDC models. If the OLED screen does not work, if it is not damaged, it has a problem with the power supply. All the more, give the phone to a good repair shop, even for diagnostics. You will learn everything - you need to measure the ports with the current, check the screen. You may find that you now have two :-) working screens :-). Fingers crossed.

из

Добавить комментарий

I'd second popping into a shop and see if they can test another screen for you.

You could try a soft reboot.

Or even dfu mode restore.

Sometimes, the aftermarket screens have ever so slightly bigger fpc connectors, and these can stretch out the board connectors, but this is rare.

Is It an oled or LCD replacement?

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

it is an oled screen

из

Добавить комментарий

Добавьте свой ответ

David Johnson будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 2

За всё время: 122