Перейти к основному содержанию

Repair and disassembly guides and support for dish washing appliances.

707вопросов Показать все

My GE dishwasher stopped cleaning as soon as warranty ran out.

My GE dishwasher fills with water, but diverts water to sewer instead of the washing head. I has a very low water flow, so I changed the water flow valve. I get plenty water now. But in the cycle after approx. 20 seconds of water flow the drain to sewer starts for 10 seconds. At this time it goes to wash mode. I can see some water on bottom and head has moved some around some, but not enough water to see running down the sides.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0

2 Комментариев:

Please give us your model number.

из

Добавить комментарий

1 ответ

Pump and Motor Assembly

The motor drives an impeller to force water up through the wash arms. If the motor is defective, the pump impeller is broken, or some part of the pump is clogged, dishes won’t be cleaned properly. Make sure that power is getting to the circulation pump and motor. If power is getting to the pump and motor assembly but it still won’t run, replace the pump and motor assembly.

Here’s the part:

https://www.repairclinic.com/PartDetail/...

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

Th diverting solenoid was faulty/stuck. Thanks for all of the answers.

из

Добавить комментарий

Добавьте свой ответ

Victor Owen будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 2

За всё время: 122