Перейти к основному содержанию

This receiver is Bluetooth Ready, has 110 Watts x 5 Direct Energy Amplification and is iPad / iPhone Certified with supplied cable

26вопросов Показать все

No audio coming out of the speakers.

When all hooked up properly, I have no audio coming out of the speakers, can only hear a buzzing/hissing sound from all the speakers. It doesn't matter which input is selected, they all have the same issue. Even before selecting any input at all, you can hear the buzzing/hissing as soon as the unit is powered up. Any help would be much appreciated.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
2 Комментариев

Do you have a multimeter?

из

Добавить комментарий

1 ответ

Наиболее полезный ответ

Go through the diagnostics section of the service manual here. You can start at "Step 2: Power Supply".

Let me know where you get to.

Был ли этот ответ полезен?

Оценка 1

6 Комментариев:

Right from the start checking pin 1304 for 12v, I only have about 3.8 to both pins

из

And now I must have touched something I wasn't supposed to because now I have no power to the unit at all -_-

из

@Jay Castvan Is there any AC voltage coming out of the transformer?

из

How would I be able to test that? I do have 120v going in, just not sure which set of wires if the voltage out

из

@andrewsawesome I got the unit to reset, and now I have power to the unit again. So now I'm back to where I started with the buzzing/hissing sounds coming from the speakers

из

Показать 1 больше комментариев

Добавить комментарий

Добавьте свой ответ

Jay Castvan будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 2

За последние 30 дней: 10

За всё время: 361