Перейти к основному содержанию

Repair and disassembly information for Sony WH-1000XM2 wireless noise-cancelling over-ear headphones.

7вопросов Показать все

Damage to Charging Port Sony WH-1000XM2

I have accidentally push the charger into the charge port in the wrong direction and have bent two of the pins inside the port. I need to replace the charging port but I am struggling to find parts or a guide. Any recommendations on where I can find a replacement port for Sony Wh1000xm2?

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0

2 Комментариев:

if you can get it opened and post a photo of the port it would help as not all ports are specific to an item

из

hi Daniel I have managed to get it open, here is the image: https://imgur.com/2tf0lNi

из

Добавить комментарий

1 ответ

HI @lmalfunctionl

I made a guide on a similar model

SONY WH-CH700N bluetooth headphones USB charging port Replacement

I think the micro USB part is similar in yours:

https://www.ebay.co.uk/itm/142512274587

Hope it helps!

Был ли этот ответ полезен?

Оценка 0

3 Комментариев:

Hi Honakrisi, thanks for the guide. Here is a link of the part I am looking for.: https://imgur.com/2tf0lNi

Would you happen to know if I am able to source this part with the board or if it is better to solder the port on?

из

I think you would struggle to find the charging board assembly. I would just desolder the port and put a new one on. Much more cost effective as well.

из

Hi @lmalfunctionl

If your in Australia, grabbing a port from jay car works. I've done this before and it still works wonders

If not, disregard all of that and just find a cheap but quality port and a soldering kit (If you don't already have one)

из

Добавить комментарий

Добавьте свой ответ

Kajol будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 10

За последние 30 дней: 42

За всё время: 783