iPad screen wont turn on after power button replacement

Question

iPad Air 4

Apple's October 2020 refresh of its iPad Air tablet, sporting an A14 Bionic processor, a 10.9" screen, a new design, and in-button TouchID.

36вопросов Показать все

Apostolos Gkioni @apode

Репутация: 1

Опубликовано: 26 окт 2022 г.

Опции

iPad screen wont turn on after power button replacement

Hello, i got this iPad from a friend. The iPad fell down and the power button got smashed in . It did power on when I put a cable in it but it went straight to recovery mode, I tried exiting recovery mode but it wasnt possible. After opening the iPad up I replaced thee power button but now the display will only light up for a few seconds and turn off again. I tried connecting it to my computer but the device is not recognized by iTunes neither 3uTools

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

1 ответ

bert.harmidomski @tojaert Репутация: 4,8к 11 5 1 · Answer 1 · 2023-03-14T03:35:11-07:00

bert.harmidomski @tojaert

Репутация: 4,8к

11

5

1

Опубликовано: 14 мар 2023 г.

Опции

hello there,

It seems that the fault is deeper than originally thought (which is rather normal for iPads, they are difficult devices to repair, especially in untrained hands). Remove the home button (disconnect it) and try to start the tablet again. The recovery mode clearly indicates that at least one of the devices on the motherboard has no contact or shorts its circuits to ground. The motherboard needs to be removed and inspected for all circumstances. However, the repair should not be expensive and rather short. Due to the broken Home button, you will probably lose Touch.ID functionality.

Был ли этот ответ полезен?

Да Нет

Оценка 0

Добавить комментарий

iPad Air 4

iPad screen wont turn on after power button replacement

1 ответ

Добавьте свой ответ