Generic ttl outputs for the drawers and bins

Question

Omnicell Anesthesia Workstation

Repair guides and service information for Omnicell Anesthesia Workstation (AWS) - an automated anesthesia medication dispensing system. There are several versions of the device: G3, G4, and XT Anesthesia Workstation.

1вопросов Показать все

Steven Rose @stevenrose50747

Репутация: 1

Опубликовано: 3 фев 2023 г.

Опции

Generic ttl outputs for the drawers and bins

Can I use a generic device to operate the drawer locks and bins, without going through the proprietary software? I purchased a surplused G4,

I am using the G4 as a hardware container!

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

Добавить комментарий

1 ответ

oldturkey03 @oldturkey03 Репутация: 784к 1,1к 894 2,3к · Answer 1 · 2023-02-03T13:20:07-07:00

oldturkey03 @oldturkey03

Репутация: 784к

1,1к

894

2,3к

Опубликовано: 3 фев 2023 г.

Опции

Steven Rose if it is anything like the Pyxis I have been working on, there is not really a good way. The addresses for the drawers etc. are all part of the software. Without the software, you do not get the desired drawer opening etc. unless you can code and write it yourself. You will need the right addresses for the drawers etc.

Был ли этот ответ полезен?

Да Нет

Оценка 0

Добавить комментарий

Omnicell Anesthesia Workstation

Generic ttl outputs for the drawers and bins

1 ответ

Добавьте свой ответ