Перейти к основному содержанию

Nintendo's first 3DS handheld device released February 2011, identified by model number CTR-001.

459вопросов Показать все

Did I mess it up beyond fixing?

I took off the back of my 3DS to look at the insides tonight to check it out. I thought I was careful enough to not mess things up, but when I was closing it back up, I found this little metal piece on my mat.

Block Image

Did I break something irreplaceable? Because that wasn't there before I opened the backside up.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Наиболее полезный ответ

The beoken off piece looks like an antenna connector thar came off with a little bit of the circuit board. Unless you know microsoldering, I don't think you can repair it yourself.

Был ли этот ответ полезен?

Оценка 1

3 Комментариев:

I still wonder how/if it'll affect powering on/game play. If it is wi-fi related, then hopefully it'll still work, as I don't have plans of trying to connect to another ds console. It doesn't have a charge right now since it had been years since it was last played and I'm waiting for a replacement charge cord. I did remove a considerable amount of lint from the charge port.

из

@alexciareynolds If it's just related to the Wi-Fi antenna, it might still work. I would try it and if it doesn't work, don't replace any components.

из

@andrewsawesome I got a charge cord and everything seems to work, including wi-fi, however it doesn't charge unless I jiggle and hold the charge cord at odd angles, which is its major problem to begin with. I think I'll take time from it before trying to fix it. I saw a guide somewhere that mentioned aluminum (foil?) tape and a heat gun to attempt having the port have a better connection.

из

Добавить комментарий

Добавьте свой ответ

Alexcia Reynolds будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 5

За всё время: 51