Перейти к основному содержанию

The second generation of the iPad with Wi-Fi, GSM and CDMA models. Some models were refreshed before the iPad 3. Repair is difficult and requires heat and prying. Released on March 11th, 2011. Model numbers: A1395, A1396, and A1397.

730вопросов Показать все

A1397 Looking for NAND Flash Memory Chip to Physically Destroy

Mine is the A1397. And I am just trying to physically destroy the data before i give it to a recycling center. So I don't need to be careful with it. However, after doing some research online and asking chatGPT it told me that only the NAND flash memory chip holds the data and I am having trouble identifying where this component is. I am just trying to find the part that holds this NAND flash memory chip and physically destroy it with a hammer or something, so no one can access the data. Any suggestions? I attached a picture where one component is on the left, and the other component is on the right. In which component or piece is the data located or stored? Thanks!

Block Image

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 0
Добавить комментарий

1 ответ

Наиболее полезный ответ

Right side, under the big metal shield.

Был ли этот ответ полезен?

Оценка 1

3 Комментариев:

Cool, thank you so much. That narrows it down. Do you know which part of the big metal shield? There seems to be 3 segments to it. I am assuming under the big metal shield is the logic board and the NAND flash chip is embedded into it? Thanks again.

из

@tonythebruin all marked in the tear down page, seems to be under the shield next to the battery connector.

iPad 2 Wi-Fi EMC 2415 Teardown

из

Got it, thank you so much. That teardown page helps!

из

Добавить комментарий

Добавьте свой ответ

Anthony Liu будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 8

За всё время: 89