Перейти к основному содержанию

Repair guides for different types of storage devices, ranging from internal hard drives to network attached drives.

632вопросов Показать все

Is it possible to find QNAP TS-409U replacement parts

Is it possible to find reasonable cost replacement parts for a 1U QNAP NAS device? A QNAP TS-409U, no device page for any QNAP stuff yet.

I could use a new power supply for this model I listed above and have not been able to find anything from regular searches. I will be calling around during normal hours tomorrow, but thought it could not hurt to ask and see if anyone had a online resource i am not aware of for a device like this. ( i would hope a power supply would not be terribly expensive, this is my fear and another reason i am asking) these types of devices are fairly expensive to purchase and of course replace if not repair is not possible.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 1
Добавить комментарий

2 Ответов

Выбранное решение

Brian, sure looks like a proverbial needle in a haystack. Looks like the TS409-U uses a Channel Well Technology (CWT) PSM 200A-89. The QNAP part number is SP-5BAY-PSU. The only values I can find are:

Input:115-230V, 47-63 Hz, 3.0A

+5V 13A 65W max

+3.3V 17A 56W max

+12V 15A 180W max

-12V 0.3A 3.6W max

+5V 2A 10W max

Here are a few suppliers, depending on your region. Looks like it's popular in Europe (and expensive;) http://eng.estock.fr/basketadd.php?partn... Here is the one from Qnap http://shop.qnap.com/index.php?route=pro... The layout and a bit more data on the power supply from here http://www.cwt.com.tw/upfiles/layout0123... Hope this helps, good luck.

Был ли этот ответ полезен?

Оценка 2

2 Комментариев:

Fantastic, this is the kind of info i was hoping to find, sure beats buying another model, thank you.

из

Thanks for accepting my answer. Best of luck to you :)

из

Добавить комментарий

Hey

I'm looking to replace the PSU in my 409U as well.

I am currently running it off a standard ATX PC PSU.

any ATX 1U PSU of apropriate wattage will do.

I have ssen a few on e-bay which can be made to fit but I am yet to find one that will directly replace the 15cm model on the NAS.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Brian будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 2

За всё время: 4,349