Опции

power port on chassis loose

Hi.

The port to plug my ac adapter into is loose. whenever I go to plug it in, the plug always falls out. I've checked why, and it appears that I've broken the foundation it was attached to.

I can still charge, so that's not the issue.

What can I do to reconnect it to the "base" it's attached to, so it won't constantly fall out?

I'm guessing this has to do with opening the case, and getting down to the motherboard. As well as either some soldering, etc....

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка -1

3 Комментариев

Please give the last three figures of your serial number.

26 мар 2012 г. из mayer

the last 3 of the SN is

RJ7

26 мар 2012 г. из Steve

Apple PowerBook G4 1.5 12" (Al) Specs

Identifiers: 12-Inch - 1.5 GHz - M9690LL/A* - PowerBook6,8 - A1104 - 2030

27 мар 2012 г. из mayer

Добавить комментарий

Опубликовано: 27 мар 2012 г.

Опции

The main problem is getting to the screw that holds the DC-IN board in place, here's the guide: PowerBook G4 Aluminum 12" 1-1.5 GHz DC-In Board Replacement

The screw is usually held in place with one screw and is covered by a piece of tape. It's about the last thing to be removed when tearing down this machine so you can actually superglue it into place along with using locktite to secure the screw.

Был ли этот ответ полезен?

Да Нет

Оценка 2

Добавить комментарий

PowerBook G4 Aluminum 12" 1-1.5 GHz

power port on chassis loose

1 ответ

Добавьте свой ответ