Репутация: 1
1
I have a brand new digitizer and i used it on a corrupted iPhone and it work working perfectly fine and i out it on another one that was working fine with broken glass. i replaced it with this new digitizer and the picture shows up but i cant unlock it
any help why this is happening or like maybe i dont have the ribbon cable in
can some one tell me which each cable does?
Это хороший вопрос?
Репутация: 77,1к
337
104
145
try reseating all the display connectors first-they can be tricky, make sure phone is powered off before attempting this or you may end up with more problems.
Был ли этот ответ полезен?
it is an apple software problem and not a hardware issue
Был ли этот ответ полезен?
Репутация: 1
1
4
Software problem ? Mine worked with the broken display, but after I replaced it with the new one the touch screen didnt work anymore
Был ли этот ответ полезен?
Репутация: 782,4к
1,1к
893
2,3к
I go for hardware issue, but you never know. Sure you can and should try to do a hard reset on your phone after repair like this. Sync your iPhone then put it into dfu mode, restore it and then just re sync it with the old sync. See if that fixes it,When you have done that and it still does not work I would make sure that all the connections are seated properly and that there is no corrosion or debris on the connectors. Let us know how it is going ....good luck
Был ли этот ответ полезен?
За последние 24часов: 0
За последние 7 дней: 1
За последние 30 дней: 1
За всё время: 2,394
