Перейти к основному содержанию

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

549вопросов Показать все

Will not recognize replacement hard drive

I went through the hard drive replacement guide step by step. I did everything according to directions. I did not have any parts left over at the end. My iMac will power on, but will not recognize the new hard drive I installed. I ran the Snow Leopard install CD because I wanted to restore from backup to the new hard drive. The install program ran from the DVD optical drive, but it simply cannot see the new internal hard drive. My original 250GB hard drive was made by Western Digital the new 500GB hard drive is a Hitachi Deskstar model. I have not yet attempted to replace the original and see what happens.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 2
Добавить комментарий

1 ответ

Выбранное решение

When you boot from the installation disk, did you go to Utilities - Disk Utility and format the disk?

Был ли этот ответ полезен?

Оценка 4

5 Комментариев:

I went to Utilities - Restore from Time Machine backup (or something of the kind).

из

Ok, I feel less than intelligent. Yes, I had to format the drive first. Thanks for the help.

из

No problem, glad to help.

из

Thank you for this too. I'm glad you had this problem and posted the solution. Didn't know I had to format it before it would see it!

из

Добавить комментарий

Добавьте свой ответ

markbradley будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 4

За последние 30 дней: 7

За всё время: 3,299