Перейти к основному содержанию

Alienware 17 R2 Status-Light Board Replacement

Выберете то, что вам нужно

    • Remove the screws that secure the status-light board to the palm-rest assembly.

  1. Alienware 17 R2 Status-Light Board Replacement, Lifting the Status-Light Board: шаг 3, изображение 1 из 1
    • Lift the status-light board off the palm-rest assembly.

  2. Alienware 17 R2 Status-Light Board Replacement, Screw Align: шаг 4, изображение 1 из 1
    • Align the screw holes on the status-light board with the screw holes on the palm-rest assembly.

  3. Alienware 17 R2 Status-Light Board Replacement, Screw Replacement: шаг 5, изображение 1 из 1
    • Replace the screws that secure the status-light board to the palm-rest assembly.

  4. Alienware 17 R2 Status-Light Board Replacement, Sliding the Status-Light Board: шаг 6, изображение 1 из 1
    • Slide the status-light board cable into the connector on the status-light board and press down the latch to secure the cable.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Terrence15

Участник с: 12/18/17

79 034 Репутация

Автор 441 руководств

Команда

RampUP America, Inc. Участник RampUP America, Inc.

Community

42 членов

Автор 1 985 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 2

За всё время: 282