Перейти к основному содержанию

Эта версия возможно содержит некорректные исправления. Переключить на последнюю проверенную версию.

Выберете то, что вам нужно

  1. Этот шаг не переведен. Помогите перевести

    : шаг 1, изображение 1 из 2 : шаг 1, изображение 2 из 2
    • Ensure that your device is turned off.

    • Remove any micro-SD card that may be installed in the Fire. Failure to do so could damage the micro-SD card itself or the micro-SD card reader on the Fire.

    • While holding the device firmly, wedge the iFixit Opening Tool into the crease along the outer edge of the device (as shown in the image).

    • Slowly, grind the iFixit Opening Tool into the crease along the outer edges of the device until the entire back cover loosens.

    • Then, remove the back cover from the device.

  2. Этот шаг не переведен. Помогите перевести

    : шаг 2, изображение 1 из 2 : шаг 2, изображение 2 из 2
    • Pry the speaker from the case using the iFixit Opening Tool.

    • Lift the speaker up from the device to remove the speaker wires from their groove in the case.

    • Be careful not to pull the speaker wires from the motherboard.

  3. Этот шаг не переведен. Помогите перевести

    : шаг 3, изображение 1 из 3 : шаг 3, изображение 2 из 3 : шаг 3, изображение 3 из 3
Финишная черта

Еще один человек закончил это руководство.

Amber Bunch

Участник с: 02/10/16

1 381 Репутация

Автор 3 руководств

Команда

USF Tampa, Team 1-2, Nance Spring 2016 Участник USF Tampa, Team 1-2, Nance Spring 2016

USFT-NANCE-S16S1G2

3 членов

Автор 13 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 2

За последние 30 дней: 16

За всё время: 1,175