Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Введение

Removing the bottom panel is safe and only requires a screwdriver.

Запчасти

Детали не указаны.

  1. Remove the two 4.8 mm black screws above the lens on the front of the camera.
    • Remove the two 4.8 mm black screws above the lens on the front of the camera.

  2. Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
    • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

  3. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Shop Kits

    Enough RAM
    For All The Tabs

    Shop Kits
  4. Remove the 4.8 mm black screw on the left side of the camera.
    • Remove the 4.8 mm black screw on the left side of the camera.

  5. Remove the front panel by lifting it away from the camera's body.
    • Remove the front panel by lifting it away from the camera's body.

  6. Remove seven 4.25 mm black screws on the bottom panel.
    • Remove seven 4.25 mm black screws on the bottom panel.

  7. Remove the bottom panel.
    • Remove the bottom panel.

Заключение

To reassemble your device, follow these instructions in reverse order.

Sterling Vinson

Участник с: 17.04.2011

223 Репутация

Автор 5 руководств

Команда

Cal Poly, Team 8-8, Regan Spring 2011 Участник Cal Poly, Team 8-8, Regan Spring 2011

CPSU-REGAN-S11S8G8

5 членов

Автор 22 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 1

За всё время: 1,641