Введение

The front housing includes the motor, the chuck, and the gears. There's a good chance that whatever needs to be replaced will be found in here.

Запчасти

Никакие детали не требуются.

On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.
  • On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.

Добавить комментарий

Pull the front housing apart from the rear. The motor and gears might fall out when you are pulling it apart.
  • Pull the front housing apart from the rear.

  • The motor and gears might fall out when you are pulling it apart.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Matt

Member since: 10.10.2010

365 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 5-17, Maness Fall 2010 Member of Cal Poly, Team 5-17, Maness Fall 2010

CPSU-MANESS-F10S5G17

3 членов

Автор 7 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 3

За всё время: 80