Введение
Here you will be removing several parts of the device to get to the USB port.
Выберете то, что вам нужно
-
-
Remove the four screws on the back of the GPS using the T5 Torx screwdriver.
-
-
-
-
Using the T5 Torx screwdriver, remove the two screws located on the motherboard.
-
-
-
Using a soldering iron, desolder the USB port connected to the motherboard.
-
Check out this awesome guide on how to solder and desolder connections.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.